Beskrivelse
Passive infra-red presence detector KNX for ceiling installation in false ceilings Square detection area 360°, 7 x 7 m, (49 m2) at mounting height 3 m 3 channels light and 2 channels presence Automatic presence- and brightness-dependent control for lighting and HVAC Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control. Manual alignment of the detection area (swivel mechanism) Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs 3 directed light measurements 2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor Switched or constant light control with 2 independent control systems and standby function (orientation light) Switching mode with dimmable lighting Fully or semi-automatic Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control Teach-in of the brightness switching value or the set point value Light time delay configurable Self-learning time delay can be set using parameters, object or via remote control Reduction of time delay when present briefly (short-term presence) Manual override by telegram or remote control 2 presence channels C4, C5, individually configurable Switch-on delay and time delay configurable Room monitoring with selective movement detection Setting the room correction factor for brightness measurement comparison Configurable sensitivity Extremely simple setting of the energy-saving ratio with the new «eco plus» function Test mode for checking function and detection area Scenarios Parallel switching of multiple presence detectors (Master/Slave or Master/Master) Installation in false ceilings with springs Surface mounting on ceilings possible with the AP-frame (optional) User remote control «theSenda S» (optional) Management remote control «SendoPro» (optional) Installa…
