Beskrivelse
Passive infra-red presence detector KNX for flush-mounted ceiling installation Rectangular detection area 360°, 30 x 4,5 m, (135 m2) at mounting height 3 m, for corridors and storage areas, with 2 individually connectable and disconnectable detection zones 2 channels light and 2 channels presence 2 channel light C1, C2 with 2 light measurements 2 presence channels can be parametrized individually Adaptable 2 channel light measurement Function aura effect, switches on the lighting group when there is a person in its detection area and dims the adjacent lighting groups Function chaser light, recognises the direction of movement of the people in the room and “predictively” switches on the adjacent lighting group Function walking direction recognition Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps Can be used as fully or semi-automatic, switchable Switch or constant light control mode with stand-by function Dimmable lighting in switch mode with stand-by function Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control Teaching in of the brightness switching value or the set point value Room correction factor setting for brightness measurement calibration Light time delay can be set using parameters, on the device itself or via remote control Switch on delay and time delay for presence can be set Detection sensitivity can be set Reduced time delay in the event of a shorter stay in the room (short presence) Scenario functions Test mode for checking function and detection range Sensitivity adjustable Detection area can be limited using cover clip Manual override using telegram or remote control Parallel switching of several detectors in Master/Slave or Master/Master possible Ceiling installation in flush-mounted socket Ceiling installation also possible with surface-mounted frame User remote control and …
