Beskrivelse
Passive infra-red presence detector KNX for flush-mounted ceiling installation Square detection area 360°, 9 x 9 m, (81 m2) at mounting height 3 m 3 channels light and 2 channels presence 2 channel light C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor 2 presence channels can be set individually Adaptable 3 channel light measurement Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps Can be used as fully or semi-automatic, switchable Switch or constant light control mode with stand-by function Dimmable lighting in switch mode with stand-by function Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control Teaching in of the brightness switching value or the set point value Room correction factor setting for brightness measurement calibration Light time delay can be set using parameters, on the device itself or via remote control Switch on delay and time delay for presence can be set Detection sensitivity can be set Self-learning time delay Reduced time delay in the event of a shorter stay in the room (short presence) Scenario functions Extremely easy setting of energy saving characteristics with the new “eco plus” function Test mode for checking function and detection range Parallel switching of several detectors in Master/Slave or Master/Master possible User remote control and management-remote control (optional) Room monitoring * According to warranty terms and conditions, see www.theben.de/en/guarantee
